Smart IPTV on Samsung and LG: Sending Your Playlist to the TV

The setup, one screen at a time

1. Readiness check before you begin

   Confirm the app is available for your TV: search Smart IPTV in the Samsung or LG store. Store availability for this app has changed over the years, and if it is not listed on your set, IPTV Smarters is the simpler alternative. Check the connection at the TV with the network status screen in its settings. Then have two things ready on a second device: a browser open, and your M3U link copied from the activation message, which contains your username and password, so keep it private.

   Order a SMARTIFLIX login

2. Open Smart IPTV and note the MAC

   Launch the app on the TV. It shows a MAC address on screen, a string of six pairs of characters separated by colons. Take a photo of it with your phone. That photo prevents the most common mistake, a single wrong character that sends your playlist to a TV that is not yours.

3. Send your playlist from another device

   On the phone or laptop, open siptv.app/mylist. Enter the MAC address exactly as shown, paste your M3U link into the URL field, and tick the option to keep the playlist online so the app reloads it each time. Then press Send. The page confirms when the list has been added.

4. Restart the app on the TV

   Close Smart IPTV fully and open it again. The channel list loads from the playlist, followed by the guide data it contains. On an older TV this can take a moment with a large list, so wait before pressing buttons. Pressing keys while the list is still loading can make the app appear frozen. If nothing has changed after a couple of minutes, close the app again, check that the TV is still connected to the network, and reopen it once more before trying the upload a second time.

5. Find the Canadian channels

   Smart IPTV groups channels according to the playlist categories. Scroll to the Canadian groups and note the channel numbers you use most, or use the app’s favourites feature where your TV version supports it. If the full list is too slow on an old set, ask our support team whether a playlist limited to the categories you need is possible for your account.

6. Check guide time and language

   The guide follows the TV’s own clock, so first confirm the time zone in the TV settings is the one for your province. If the schedule is still shifted, look through the app’s settings for a time shift option. Audio track controls in Smart IPTV depend on the TV model; if you cannot switch between French and English on a channel, pick its other-language counterpart from the list.

7. Test from the couch before relying on it

   Before the next big game, sit where you normally watch and flip through a few Canadian channels, including one in French and one in English. Watch one for several minutes at the time of day you usually watch. If the picture holds, you are set. If it stalls, note whether every channel stalls or only one, because that tells you whether to look at the TV’s connection or try the other version of that single channel.

8. Activate after the trial

   Smart IPTV is free for a short trial, after which the developer charges a one-time activation per TV at siptv.app/activation, using the same MAC address. That payment goes to the app developer and is separate from your SMARTIFLIX plan. On busy winter evenings, the app’s small size helps an older TV keep up, but a weak Wi-Fi signal still hurts, so use Ethernet on that set if the router is close enough.

If a step does not work

The upload worked but the TV shows no channels

Restart the app after a minute. Then check the MAC address character by character against your photo, including the colons. The app holds one playlist at a time, so a later upload to the same MAC replaces the earlier one.

Playlist expired or not found

This usually follows a reinstall of the app or a factory reset of the TV, which clears the stored list. Send the M3U link again at siptv.app/mylist using the same MAC address.

Channels buffer on the far bedroom TV

Smart IPTV cannot compensate for a weak signal. Check the TV’s network status screen, and if the signal is low, try a mesh node in the room or a cable. A phone test next to the router confirms the account is working while you sort out the room.

The guide shows the wrong province’s schedule times

Set the TV’s time zone correctly first, then restart Smart IPTV so it reloads the guide. Use any time shift option in the app only if a gap remains.

More players you can pair with SMARTIFLIX

Prepared by SMARTIFLIX Support Desk · Reviewed 5 September 2026